The production process of three side sealing bag making machine

Compared with foreign countries, China's packaging machinery started late. It was just started in the 1970s. Through the research on Japanese packaging machinery, China's first packaging machine was born. After more than 30 years of improvement, China's packaging machinery has become one of the top 10 industries in the development of machinery industry, which provides a very favorable foundation for the development of China's packaging industry. Some packaging machinery is to meet the blank abroad, a lot of packaging machinery are exported to foreign countries. Like we are familiar with the three side sealing bag machine is a kind of packaging machinery, the following is to introduce the three side sealing bag machine essential parts and stop cleaning steps.

1. Necessary parts of the three-side bag sealing machine:

(1) Cutter: It is a very important part in the bag making machine. It adopts moving knife and sliding guide. It is a floating mechanism compressed by a spring. It can adjust the upper and lower knife. It also has an adjustment screw, so that the cutting knife tightness can be arbitrary adjustment. In the process of bag making, the cutter is mainly used to eliminate the situation that the raw material is difficult to remove.

(2) Bag-making length adjuster: it is used to adjust the bag-making length device, which controls the bag-making length by changing the position of the connecting rod set on the eccentric pallet, and the bag-making size can be adjusted by the elastic handwheel and the nut.

2. Cleaning steps of three-side bag-sealing machine when it stops:

Three-side sealing bag in the long-term use of the process, the machine will appear different degrees of wear, and there will be a certain amount of machine, stop cleaning is a very rigorous step, in the process of cleaning must be strictly according to the station established steps to operate. The steps are as follows:

(1) First, the power supply of the three-side bag sealing machine needs to be turned off.

(2) Pack all the products that meet the process requirements of the order, mark them one by one, and then go through the warehousing procedures.

(3) Confirm and verify the waste products produced in the bag-making process, keep the account according to the multiplicative amount, and put them in the specified position.

(4) Tidy up the working utensils used in the bag-making process and keep them reasonably.

(5) Fill in all kinds of bag making quality records, and timely report to the workshop management personnel.

(6) Clean the surrounding sanitation of the three-side bag sealing machine, and make corresponding maintenance sanitation.

(7) Clean the floor of the workshop to ensure a clean environment for the next operation.

These seven steps need to be carried out strictly in accordance with the sequence, especially the first one. It is very unsafe to operate under constant electricity, and records should be made during the operation to avoid unnecessary losses. It is important to remind you that personal safety is very important in any operation.

The necessary parts of the three-side sealing bag-making machine are indispensable. At the same time, the equipment must be stopped and cleaned in the process of long-term use. In this way, the service time of the equipment will be greatly improved and the efficiency of the work will also be greatly improved. Here warm tips, we supply a large number of three-side sealing bag, product quality is good, you can contact us if you need.

Ruian Zhoutai Packaging Machinery Co., LTD specializes in manufacturing three-sided bag sealing machine, more related products please pay attention to the official website www.raztjx.com